you do realize that type of aluminum beer keg ,
gas tank repair, minor intake manifold cracks,
minor porting screw-ups on aluminum intakes,
like sealing pin holes and thermostat corrosion repairs ARE
generally done like this VIDEO BELOW
http://garage.grumpysperformance.com/index.php?threads/aluminum-repair-without-the-tig-welder.376/
https://www.harborfreight.com/8-piece-low-temperature-aluminum-welding-rods-44810.html
WATCH VIDEO
http://durafix.com/demo/256.html
http://durafix.com/index.html#order
BTW it should be obvious, it would be smart to fill the empty beer keg fuel tank with a complete flush of argon or CO2 before using a torch near any fuel tank,
BTW
if you don,t have a welding tank with shield gas handy your local super market generally can sell you 5-6 lbs of DRY ICE, if you pour all the fuel out and flush the tank with water and a few drops of dawn dis soap then rinse, then drop in 5-6 lbs of crushed dry ice and cover the exits with duct tape then wait 20 minutes the tank will be filled with a low pressure cloud of co2 gas making an explosion impossiable
and you could very easily do it faster, cheaper and better yourself
gas tank repair, minor intake manifold cracks,
minor porting screw-ups on aluminum intakes,
like sealing pin holes and thermostat corrosion repairs ARE
generally done like this VIDEO BELOW
http://garage.grumpysperformance.com/index.php?threads/aluminum-repair-without-the-tig-welder.376/
https://www.harborfreight.com/8-piece-low-temperature-aluminum-welding-rods-44810.html
WATCH VIDEO
http://durafix.com/demo/256.html
http://durafix.com/index.html#order
BTW it should be obvious, it would be smart to fill the empty beer keg fuel tank with a complete flush of argon or CO2 before using a torch near any fuel tank,
BTW
if you don,t have a welding tank with shield gas handy your local super market generally can sell you 5-6 lbs of DRY ICE, if you pour all the fuel out and flush the tank with water and a few drops of dawn dis soap then rinse, then drop in 5-6 lbs of crushed dry ice and cover the exits with duct tape then wait 20 minutes the tank will be filled with a low pressure cloud of co2 gas making an explosion impossiable
and you could very easily do it faster, cheaper and better yourself
Last edited: