5/8 unf fuel pipe and ends

Dear all

Where can I buy the pipe work and adapters to make fuel pipes ?
Thx Arjen
Summit Racing online. Jegs Online.
If you have a local speed shop its most convenient to shop buy in person Fuel system related parts hardware needed.
 
Fuel-Pump-Flow-Requirements.jpg

line4.jpg


http://fuelab.com/understanding-fuel-line-fittings-straight-thread-and-an-vs-tapered-thread/

https://www.asap-supplies.com/us/fittings-valves-strainers/fittings/hose-tail-fittings

Use these ratings to decide your return line sizing based upon fuel pump output:
fitr1.jpg

fitr2.jpg

fitr3.jpg

*
Up to 45 GPH = 5/16" or -04 AN
*
Up to 90 GPH = 3/8" or -06 AN
*
Up to 250 GPH = 1/2" or -08 AN
*
Up to 450 GPH = 5/8" or -10 AN
*
Up to 900 GPH = 3/4"or -12 AN

Use these figures as a fuel line sizing standard: if your feeding a carburetor with the typical 8-10 psi fuel pump feeding to the fuel pressure regulator

* Up to 250 HP = 5/16" or -04 AN
* Up to 500 HP = 3/8" or -06 AN
* Up to 700 HP = 1/2" or -08 AN
* Up to 1000 HP = 5/8" or -10 AN
* Up to 1500 HP = 3/4" or -12 AN

don,t skip READING THROUGH the links,
and sub-links theres a ton of related useful info in those


https://www.amazon.com/10AN-AN10-Stainless-Steel-Braided/dp/B01MT5C6HO/ref=sr_1_15?ie=UTF8&qid=1528719700&sr=8-15&keywords=5/8+fuel+hose

http://garage.grumpysperformance.co...ing-up-your-fuel-system.211/page-2#post-39677

http://garage.grumpysperformance.co...ubing-fuel-lines-and-flaring.1030/#post-35905

http://garage.grumpysperformance.com/index.php?threads/installing-a-fuel-cell.733/#post-6470

https://www.discounthydraulichose.c...MI8JPO183L2wIV0oV-Ch2E-w80EAQYAyABEgKUU_D_BwE

http://garage.grumpysperformance.co...c-fuel-pump-selection.10664/page-2#post-46237

http://garage.grumpysperformance.co...-sizing-return-vs-feed.3067/page-2#post-44823

http://garage.grumpysperformance.com/index.php?threads/fuel-line-problem.9305/#post-33631
 
Last edited:
Back
Top