My 383 motor for my 88 trans am is Scat Stroker with AFR 195 Eliminator 72 cc heads, flat pistons. The càm is Comp Cams Nitrous cam 227/236, .502/.520 lift, 113 lsa. I have Stealthram and TRI-y jet hot coated headers. I will get a Crane Gm small cap distributor and Crane Gold Race narrow body 1.6:1? roller rockers. This is not an everyday driver of course but it will at least go on the Dyno . I have 31 pound flow tested injectors. Also I am just now getting around to having a baseline chip burned and I do have my own chip burner and software. I plan to buy a reman performance 700r4 with 6 pinion close ratio planetary and 2400 rpm stall torque converter. I have 3.23:1 rear and I am wondering if anyone can estimate horsepower, torque, and mileage or give any suggestions for improvement or comments about parts I should keep or get rid of. This has been a ten year project but now I am about to finish it.