So, I am in the process of fabricating a bracket to mount the small block to and old ( 80's) engine stand. 10mm lasercut and folding ...
2 weeks wait....
So we'll have to do it ourselves, do you guys have the same problem in the US?
I don,t I bought a $7K mill and $20K in welders , just so I could fabricate one of a kind parts I don't have at hand and IM still saving for a decent LATHE
BESIDES I HAVE A DRAWER FULL OF 40 YEAR OLD, ENGINEERING DEPLOMAS,
THAT SAY I'M, AT LEAST IN THEORY .. QUALIFED TO RUN A WELDER ,DRILL PRESS, AND MILL, AND LATHE,
the 305 and 307 sbc engines are far from the ideal starting points for a performance engine build-up. but they are far from being a total lost cause, EITHER! EXAMPLE pay attention to the bore stroke ratios, a 307 with its greater bore and shorter stroke , and slightly ;larger displacement...