BBC Hydraullic lifters

[kenn]

Any suggestions for whose hydraullic roller lifter to use. I understand mechanical may be better for race and all out power but I don't want the relash hassles. (Yes, I am lazy) I am looking for very reliable parts and to get a lot of miles on the parts without failure. I have noted issues with needles from broken bearings in your posts. I will be putting them into a fairly mild BBC, likely only 0.575" or less lift.

Thanks for all the good info you post on Team Chevelle!

 

[grumpyvette]

both CROWER AND ISKY have good designs, why not talk to their tech guys?
BTW adjusting lash every 3-4 months takes about 15 minutes , its really NOT, that difficult, messy or time intensive, if you expect to exceed 6000-6200 rpm solid rollers are cheaper and tend to rev higher