building an impressive 383 sbc truck engine combo

[Grumpy]

I'm building a 383 for a 1968 longbed pickup heres what i have so far scat crank scat i beam rods wiesco forged -7.5cc d cup dish pistons sitting flush with deck surface going to use a head gasket with about .035 to .040 thickness profiler 195 as cast 64ccheads 2.02 intake 1.94 exhaust valves scorpian aluminun 1.5 roller rockers quickfuel 780 vac secondary carb edelbrock performer rpm intake hooker 15/8 long tube headers turbo 350 trans 3.73 gear need help picking a cam going to be a street truck
the transmission is a tci streetfighter turbo 350 with a 3000 stall converter with 27 inch tires

reading a few links will help

http://garage.grumpysperformance.com/index.php?threads/semi-fool-proof-cam-sellection.82/
http://garage.grumpysperformance.co...e-springs-and-setting-up-the-valve-train.181/
http://garage.grumpysperformance.co...hing-the-drive-train-to-the-engine-combo.741/
http://garage.grumpysperformance.com/index.php?threads/valve-train-clearances-and-problems.528/
http://garage.grumpysperformance.co...ectly-and-get-it-to-last-cam-install-info.90/
http://garage.grumpysperformance.co...383-build-that-is-now-going-to-be-a-400.7804/
http://garage.grumpysperformance.com/index.php?threads/tbucket-engine-project-dart-shp.3814/

https://www.crower.com/searchresults/
for good street drive-ability, excellent off idle torque and mid range power something like the crower 00473, or 00468 seems a good match

why not talk to the tech guys at CROWER AND CRANE CAMS and get their thoughts
mention the intended use and matching it with your truck brakes etc.
or similar crane
crane (386)310-4875
notice theres not a huge range in the intake duration,in any of the linked choices , but the differences are very noticeable, so talk to the tech dept of the suppliers you deal with, about your combo and the cam selected.
https://cranecams.com/powermax-hydraulic-roller-222-230-camshaft-for-oe-roller-chevrolet-305-350/
crower 619.661.6477
if you want a bit more peak power, the crower 00471 is great for impressive torque and better peak power but at a very minimal loss of low rpm street/traffic drive-ability

or you can effectively split the difference and select the hydraulic roller cam I use in my similar 383 the crane 119661