c5 solid rear racing differential optional rear suspension

grumpyvette

Administrator
Staff member
87vette70TA said:
Double click on above image to view full picture
file_51_11.jpg




http://www.moserengineering.com/complet ... kage.html#"]
file_51_1.jpg

http://www.moserengineering.com/complet ... kage.html#"]
file_52_1.jpg

http://www.moserengineering.com/complet ... kage.html#"]
file_53_1.jpg

http://www.moserengineering.com/complet ... kage.html#"]
file_54_1.jpg

http://www.moserengineering.com/complet ... kage.html#"]
file_55_1.jpg

http://www.moserengineering.com/complet ... kage.html#"]
file_56_1.jpg

http://www.moserengineering.com/complet ... kage.html#"]
moser.performance.disc_3.jpg

http://www.moserengineering.com/complet ... kage.html#"]
file_57_1.jpg
[/url][/list]


The New Moser Engineering C-5 Corvette Rear Sub Frame Kit!

SKU: 12BC5 Availability: In stock.
$6,115.00


Quick Overview

The New Moser Engineering C-5 Corvette Rear Sub Frame Kit!

Fits: 1997-2004 Chevrolet Corvette

*Kit ships within 3 weeks of online order completion!


The standard kit includes the following;
New Moser 12-Bolt Housing
35 Spline Custom Alloy Axles
Moser Lightweight Steel Spool
12-Bolt Pro/Comp Ring & Pinion
1350 Series Chrome Moly Pinion Yoke
Timken Bearings
5/8" Drive Stud Kit (2" or 3")
Sealed Axle Bearings
Chrome Moly - Torque Arm, Driveshaft Loop, Transmission Cross-member, Panhard Bar, Track Locator, Lower Control Arms, Spring Saddles, Anti-Roll Adjuster, Anti-Roll Arm, Anti-Roll Tubes and Frame Rails
Mild Steel - Front Cross-member, Rear Cross-member, Upper Shock Mounts, Spring Mounts
All Associated Hardware is supplied!

Product Description

The Moser Engineering rear sub frame kit in the C-5 Corvettes. This kit was primarily designed for NHRA Stock Eliminator classes but can be adapted for other uses.

Since the C-5 Corvette is designed to be an independent rear with a transaxle, modifications must be made to the transmission tunnel, torque tube tunnel and upper rear control arm mounts to facilitate this installation. These modifications must be done in advance of the installation of this kit. The lower portion of the rear frame rails directly above the rear end housing may need to be C notched for adequate clearance. The stock fuel tanks, lines, etc.... need to be removed as well.


Useful Downloads Moser C5 Insatallation Instructions
 
Re: c5 solid rear racing differential optional rear suspensi

thats awesome, im sure you can upgrade that 12 bolt to something even stronger and go to the moon with that setup
 
Re: c5 solid rear racing differential optional rear suspensi

philly said:
thats awesome, im sure you can upgrade that 12 bolt to something even stronger and go to the moon with that setup
It appears to be The God send answer Phil.
Click on photos & examine close.
Not a True 4-link layout.
Its a Glorified Hotckiss suspension layout with a Torque arm.
Near identicle to the 1982-2002 Camaro & Firebird.
Will have Torque & Hp Limits the Moser 12-bolt.
No Dana 60 option.
I wouldn't try & put down 700-2500Hp with Moser C5 12-bolt.
Its almost $7k. Shipping extra $$.
 
Back
Top