Calling all Flathead Bubbas

M

Moyock13

Member
I've recently acquired a 59 series Ford Flathead motor. This motor comes with a factory relieved block and pop-up pistons. It also appears that the cam may be more than stock just from the lift that can be noticed in the valve train. I'm wondering if there are aluminum heads still available for a relieved 59 series block?

I'll try to post a few pictures later.
 
Yes.
Edelbrock 1115 24-bolt stud heads.
Summit Racing.
$600 +
 
Offenhauser still makes Flat head aluminium cylinder heads.
 
http://www.vanpeltsales.com/FH_web/flathead_specs-85to100mid.htm

http://www.tildentechnologies.com/Cams/FlatheadPerformance.html

http://www.vanpeltsales.com/FH_web/flathead_drawings_engines.htm

http://www.vanpeltsales.com/FH_web/flathead_specs-90to125late.htm

http://www.35pickup.com/mulligan/fhtime.htm

http://www.btc-bci.com/~billben/flathead.htm

http://www.wrljet.com/fordv8/flathead.html

http://www.honestcharley.com/hot-rod-parts/flathead-ford-performance.html

http://www.btc-bci.com/~billben/history.htm

http://www.edelbrock.com/automotive/mc/manifolds/ford/flathead.shtml

http://www.macsautoparts.com/ford_mercury_early/?ne_ppc_id=1163&ne_key_id=21578194&ne_sadid=2110976207&cm_mmc=Microsoft-_-1932-48+V8+Non+Branded-_-p-_-ford flathead&cm_guid=4-_-18527056272-_-2110976207-_-p

http://ateupwithmotor.com/model-histories/ford-flathead-v8/

http://www.wilcap.com/flathead.html

http://flatheaddrag.com/flathead_basics.html
 
Last edited:
Call SO CAL Hot Rod. They are only available when they get them from pickers because they haven't been made since the late 1960's
They are a hot Item. I just sold one to HAMB (funny that this came up as I was just looking at my PayPal receipt on Sat.
 
From about 1949 to 1951 Canadian Mercury's came with factory aluminum heads.

Thanks
Randy




s-l400.jpg
 
You must log in or register to reply here.
Back
Top