carb suggestion?

[grumpyvette]

Hello. I have a1981 gmc short box 700r4 with 2:56 gears going to switch to 3:73 when I find some for it. Engine is a 350. Bored .40 with flat tops. Xe268h cam .477/ 0.480. 190 series patriot alum heads 2.02 64cc. msd dist. Msd6a. Performer rpm intake edelbrock headers. I would just like some other opinions on what carb I should run. For a street driven. Weekend stip sometimes. I purchased a 750 quick fuel slayer for it but it runs way to rich. I have a 600 edelbrock. Where I think will be too small. I also have a 650 holley vac sec that will need a rebuild. My friend has a 650 holley double pumper I could get from him.

http://garage.grumpysperformance.co...recting-a-rich-edelbrock-carb.1820/#post-4706

http://garage.grumpysperformance.com/index.php?threads/setting-up-your-fuel-system.211/

http://garage.grumpysperformance.com/index.php?threads/fuel-pressure-regulators.635/


If the EDELBROCK CARBURETOR is running rich theres a tuning issue, or fuel delivery issue that needs to be addressed, THE LINKS ABOVE SHOULD BE HELPFUL but if your looking for a new carb....if it was my truck. Id use this
http://www.jegs.com/shop/en/jegsdirect/demon-carburetion-street-demon-carburetors-333-1901