corvette digital cluster repair or replacement link

[grumpyvette]

corvette digital cluster repair or replacement link

theres a bunch of good info here gentlemen

http://garage.grumpysperformance.co...instrument-cluster-has-stopped-working.16375/

http://garage.grumpysperformance.co...er-repair-or-replacement-link.1006/#post-8030

http://garage.grumpysperformance.com/index.php?threads/digital-dash-swap-questions.3399/#post-8969

http://garage.grumpysperformance.co...ir-of-circuit-board-solder-connections.16362/

http://garage.grumpysperformance.com/index.php?threads/digital-cluster-repair.1007/#post-1822

http://www.dakotadigital.com/index....t_id=190/category_id=427/mode=prod/prd190.htm

http://www.batee.com/

http://www.batee.com/corvette/dcrg/power_supply/

viewtopic.php?f=35&t=3399&p=8970#p8970

http://www.batee.com/corvette/dcrg/index.shtml

http://www.batee.com/corvette/dcrg/read ... index.html

http://garage.grumpysperformance.com/index.php?threads/digital-dash-swap-questions.3399/#post-8965

http://floridaspeedometer.com/VehicleProductList.aspx

http://garage.grumpysperformance.co...er-repair-or-replacement-link.1006/#post-8030

http://www.batee.com/corvette/dcrg/replace.shtml

http://www.corvettemagazine.com/2001/ja ... ashpg1.asp

OF COURSE THERES ALWAYS SOME GUY PUSHING THINGS PAST A REASONABLE USEFUL LIMIT

http://www.corvettemagazine.com/1999/de ... dashp1.asp

if your whole dash goes dark or stops working check for broken or loose wires on the #104-108 ground connections

THINK LOGICALLY ISOLATE AND TEST, CHECK YOUR FUSES AND FOR LOOSE ELECTRICAL GROUNDS AND CONNECTIONS TO SENSORS!

http://garage.grumpysperformance.com/index.php?threads/testing-an-alternator.3222/#post-46703

http://garage.grumpysperformance.co...lay-switch-locations-and-info.728/#post-54562

http://garage.grumpysperformance.com/index.php?threads/battery-or-alternator.10003/

http://garage.grumpysperformance.com/index.php?threads/multi-meters.3110/#post-59136

http://garage.grumpysperformance.co...h-flicker-on-dash-and-radio.13593/#post-70202

http://garage.grumpysperformance.com/index.php?threads/digital-cluster-repair.1007/#post-1822

 

[Doodad]

Lets get some action going on this thread...On the earler C4's if your pulling your cluster for replacement give a repair a try, (I wont get all detailed until someone replies here or I know Grump has a link burning a hole in his pocket) but open it up and clean up the ground contact (upper left) also clean the contacts for the harness(till shiny) not a bad idea to put a spring line for better contact, open up the metal housing to remove circuit board clean prongs replace bulbs while your there(just turn and pull) look at your solders if they are dull or dented resolder them. You can even change the color of your gauges with some spot light gellies. Bolt er back together.Good to go! Or do I owe you a great big apology? If you've ever done a Stereo changeout be cautious here an incorrectly installed unit can play havoc on your dash electronics look for loose,pinched or grounded wires same applies for your Electric Climate controls. Anyone?