Crower is Rebuilding Lifters Now

you might want too take advantage of the rebuilt lifters
and your now aware of how magnets in the lifter gallery tend to prevent metallic debris,
from parts failures from unexpectedly and randomly wandering around in the engine
they are available from several vendors
proper magnets trap metallic debris
SmCo Samarium Cobalt Disc Magnets
http://www.magnet4less.com/
enginemagn.jpg


http://www.magnet4less.com/product_...ucts_id=254&osCsid=ckl4nevgdrmireotnegg7jcf36

http://www.magnet4sale.com/smco-magnets-dia-1x3-8-samarium-cobalt-magnets-608-f-temperature/

Samarium Cobalt MAGNETS HELP
http://www.magnet4sale.com/smco-disk-magnet-dia-1x1-4-samarium-cobalt-magnets-608-f-temperature/
magnets are ceramic and glass hard, don,t try to drill or grind them, as they can shatter
 
Last edited:
I would send all the Lifters In Rick to get rebuilt.
Upgraded too.
HIPPO Pin Oiling.
I like the Bronze Roller Bearing too. ISKY REDZONE Style.
 
no mater what your current lifters are or the condition it would be worth the time and effort to call CROWER and ask,
if they could be refurbished or rebuilt or replace the lifters as they see the need, as Id stress that you like CROWER products, but your a bit concerned, one came apart in use,with rather limited mileage,
Id mention that the owner of this website
http://garage.grumpysperformance.com
recommended , uses and promotes, crower products, and has used them rather consistently for decades, and youll post before and after pictures on this web site.....you may get a bit better or faster
service if they realize the process, being carefully documented where hundreds of website members a day will see it, could help or hurt sales
index.php
 
You must log in or register to reply here.
Back
Top