Does Anyone Know How To Check & Change Trans Fluid /2014 Chrysler 300c Hemi

Grumpy

The Grumpy Grease Monkey mechanical engineer.
Staff member
300c.jpg

I could use some specific input,
my neighbor owns a red 2014 chrysler 300c, I can,t find the transmission fluid dip stick,
so if you gentlemen know where I can find a link to, the details on the procedures,
too check the trans fluid level, and or replace the trans fluid, etc. please enlighten me
https://www.ebay.com/i/173354496704?chn=ps
There is no dipstick for our transmissions. You'll either need to get it checked at the dealer or buy a a Miller Tool #9336A used in conjunction with the chart below based on temperature. Here's one place you can get it -Miller Special Tools.
https://www.ebay.com/itm/Mercedes-J...331958?hash=item19db3c1bb6:g:vs0AAOxyJs5Rab0Z

51SC2GqLQ1L.jpg


This is the chart...
TransmissionFillGraph.jpg

https://shop.advanceautoparts.com/find/2014-chrysler-300-automatic-transmission-fluid.c5234

https://www.amazon.com/Mopar-Automa...66MVQRR024H&psc=1&refRID=40CTS0B9B66MVQRR024H


 
Last edited:
I have a 2006 300c ( hemi/nag1)
I bought a dipstick several years ago for it.
I just checked it.
Engine running, go thru all gears, leave it run in neutral.
It is in the range of 25C and the trans is cold---70 degrees, in my shop.
I think I bought this dipstick thru summit racing.
The dipstick also has a range for 80C.
I was told to just measure what you take out and put the exact amount back in, HOWEVER, I am only 66 years old and still have not mastered the art of changing tranny fluid without getting some on the floor!
25c is about 77 degrees I think. 80C is about 177 degrees.

BTW I love this car. Runs strong handles great, and I can get 27-28 when I drive it under 70 mph. ( that is hard to do)
149,000 miles right now.
 
yes I purchased the mandator dip stick that is not included from the factory
 
I think ford calls this a factory fill. When it needs changed you do the trans too. Pretty sad. Fluid changes need to happen.
 
Back
Top