Customer posted this on YB. For the guy that want the ultimate play toy that you can drive this turned out to be a nice build....
Just got home, I am like a kid I am so giddy! Thrilled with it. I find the following three people so awesome, Steve Johnson Induction Solutions, Chris Straub (Straub Technologies) and Scott Foxwell - top notch guys. This is not a track motor, it's a
10.0:1 compression pump gas street terror deal. I drive my car everywhere on the street, so that makes what I need to be a little different than some.
Recap on motor:
Induction Solutions Sledgehammer plate
Gm 572 short block, now w diamond flat tops, upgraded rod bolts
10.0:1, BP 93 pump gas
AFR 335 heads from Chris Straub, Scott Foxwell did some work to them, they are same shop
Super Victor from Straub
1050 AED carb
Straub hydraulic cam, morel lifter. 109 lsa. 270ish/low .700's
To the numbers.......
On motor:
815.9 @ 6200
733.2 @ 5200
Made 629tq at 4200 where we started the pull, flat Tq curve. I'm sure we left power on the table due to limited time, this was not using my carb spacer, plate was on it, etc. I think 850 was maybe possible but I wanted to get to the bottle which is how I run the car.
On 150 shot, took 11 degrees of timing out
983/910
On 350 shot, took out 19 degrees of timing, SAFE first run
1,202.3 hp @6200
1,137.6 Tq @5500 !!! got Torque? Dyno shop / engine builder were blown away by that number, dyno is not customer friendly bull **** deal, he said that's a great number.
Lowest power seen on this jet was 1,181hp
I'm just happy and thankful. I will work the jetting up and timing in due time. But, this was a very successful day for me. We were going to go up another 150, I said no, this was good enough for me.
What to you guys think? Not too bad right? Regardless, it exceeded all of my expectations.
https://scontent-atl3-1.xx.fbcdn.ne...=8d378be6cfe007e1d89900bba3ae5dc0&oe=57AA8D72
https://scontent-atl3-1.xx.fbcdn.ne...=981ccc3f34ea1988cc4df35223634273&oe=57B33071
http://www.hotrod.com/how-to/engine/0806phr-chevy-496-big-block-engine-build/
http://www.dragzine.com/news/probe-industries-496ci-pistonsstroker-kits-for-big-blocks/
http://idealhowtovideo.com/bigblock80006.htm
http://www.superchevy.com/how-to/project-cars/sucp-0312-496-street-bruiser/
http://www.twperformanceparts.com/index.php?route=product/product&product_id=5302
http://www.twperformanceparts.com/index.php?route=product/product&product_id=3910
http://www.superchevy.com/how-to/project-cars/sucp-0901-496-chevy-big-block-build/
http://www.superchevy.com/how-to/engines-drivetrain/1407-642-hp-budget-iron-head-build/
http://garage.grumpysperformance.co...u-thinking-about-your-potential-combos.14607/
http://garage.grumpysperformance.com/index.php?threads/build-a-496-stroker-bbc.101/
http://www.superchevy.com/how-to/engines-drivetrain/1005chp-496ci-engine-build/
http://www.ebay.com/itm/Step-by-Ste...Big-Block-Engine-2-Disc-5Hr-DVD-/370654732889
http://www.superchevy.com/how-to/en...estech-performance-496-chevy-big-block-build/
http://www.hotrod.com/how-to/engine/116-0703-big-block-chevy-engine-build/
