GM 3 spd Manual Trans Guru needed

Discussion in 'transmission and Drive train' started by mikiesride, Mar 7, 2019.

  1. Maniacmechanic1

    Maniacmechanic1 solid fixture here in the forum

  2. Maniacmechanic1

    Maniacmechanic1 solid fixture here in the forum

  3. mikiesride

    mikiesride Member

    I'll have to measure the Saginaw trans to compare specs you gave. We are "not talking about" Light duty Car Transmissions what I posted was for HD Truck Transmissions, maybe the specs will be same or not will see. And secondly my HD Muncies reverse lever is in the Side Cover and all of the trans is Cast Iron not aluminum like your Articles "link" showed/read in its print.
     
  4. Maniacmechanic1

    Maniacmechanic1 solid fixture here in the forum

    It's what I found on my Lunch break from my phone.
    It's something.
    Keep Googling.
     
    mikiesride likes this.
  5. Maniacmechanic1

    Maniacmechanic1 solid fixture here in the forum

    Both used by Dirt Track Racers.
    Look there.
    Ask them.
     
    mikiesride likes this.
  6. T-Test

    T-Test reliable source of info

    MTGM036 318 Muncie 6 cylinder

    Tail housing could have been replaced.

    Look under Muncie 318 series tran
     
  7. mikiesride

    mikiesride Member

    OK I give up which one are you ID'ing the 5 hole trans?
     
  8. mikiesride

    mikiesride Member

    On or from Both of my postings for info on two different Trans, one is a Muncie 7 bolt side cover the other a Saginaw also 7 bolt side cover. So what does this/your mentioning of a Muncie 318 all about, that one has a 4 bolt side cover Nothing Like my two trans both have 7 bolt side covers. Please explain your input of; MTGM036 318 Muncie 6 cylinder statement!
     
  9. T-Test

    T-Test reliable source of info

    My bad for NOT reading ALL the links.:D:D:):)Good luck finding what you need.
     
  10. mikiesride

    mikiesride Member


    **********UP DATE**************** I found what I was after over at (6066gmcclub.com) The Saginaw trans is called a 326. Now for my Muncie its call a 330. Thanks for all that did contribute what info was given.
     
  11. Grumpy

    Grumpy The Grumpy Grease Monkey mechanical engineer. Staff Member

    why not post the info you found here?
    copy/paste any related charts, pictures diagrams etc.
    so others can benefit
     
  12. mikiesride

    mikiesride Member

    LOL I thought I just did. Actually what others posted for me here didn't get my question answered, answers came from some other Forum.... Bottom line is when I was over at (6066gmcclub.com) searching through the Transmissions and Rear Ends ares I saw two Threads about 3 speed transmissions and I started reading through them and stumbled on what I have been after for answers on my Saginaw trans.. BINGO got my answer. Not sure if that's what you want, anyway not sure how to do this copy or paste thing, sorry.
     
    Last edited: Mar 13, 2019
  13. mikiesride

    mikiesride Member

    I don't do copy or Paste so this is the best I can provide so you will have to go to the Forum and register/log in, and or wait for acceptance or just go to the section of Transmissions and Rear Ends then find the thread called "Transmission???" on 1st page then scroll down to post 3 & 4 and read. somewhere in this post you read identified as a sm326 Saginaw 7 bolt side cover.

    Also from same Transmissions and Rear Ends go to page 6 and find the thread "66 3 speed transmission with overdrive" and scroll down to post 9 and read. Somewhere in that post you read identified as a sm326 Saginaw 7 bolt side cover.

    Sorry this is the best I can do for "copy & paste"
     
    Last edited: Mar 13, 2019

Share This Page