I need your ideas guys on a glitch with a 2003 corvette

Discussion in 'Electrical and Ignition: Repairs and Modifications' started by Grumpy, Jun 5, 2018.

  1. Grumpy

    Grumpy The Grumpy Grease Monkey mechanical engineer. Staff Member

    worked fine until last week, gal goes out, gets in turns key... nothing, no lights, won,t start, battery then replaced, still no change.
    ive not been on site, so the next step will obviously be to pull codes
     
  2. Grumpy

    Grumpy The Grumpy Grease Monkey mechanical engineer. Staff Member

    Last edited: Jun 5, 2018
  3. T-Test

    T-Test Well-Known Member

    How you pull codes with no power?

    Test Battery for voltage, meter or light.

    I'd check at starter first with a test light, then ground from battery to block/starter.

    ASS U Me ing it is not your car and you don't have access, maybe they have basic knowledge of these steps. If not-- call AAA and deliver to your place.

    NOT trying to be a SA.
     
  4. Grumpy

    Grumpy The Grumpy Grease Monkey mechanical engineer. Staff Member

    battery has 13.6 volts battery and starter has been replaced...
    still no gauges or dash lights or response with key turned per owner,
    and no I have not seen the car yet personally,
    yes I will test fuses and relays and grounds and cable connections,
    with a multi meter, and try to pull trouble codes
    ,with a diagnostic code reader, once on-site
     
    Last edited: Jun 5, 2018
  5. Maniacmechanic1

    Maniacmechanic1 solid fixture here in the forum

    Get out tge DVM meter.
    Starter solenoid perhaps.
     
  6. Maniacmechanic1

    Maniacmechanic1 solid fixture here in the forum

    Battery cable is maybe green in the middle.
    DVM Test.
     

Share This Page