links that may help. adapters, brackets mounts etc.

[grumpyvette]

sooner or later most guys think about engine swaps, sticking a BBC or an , LS1,LS2, LS7 in thier corvette, cobra kit car,nova, or chevelle, etc. seems like a good IDEA.
in many cases its a simple deal thats been done many times and the infos available if you research it, in others its fairly rare, (like sticking a buick turbo V6 in a corvette),
one little trick Ive used is to mock up motor mounts with plexi-glass and glue, too check angles. and clearances , simply because its cheap, and you can cut, grind and drill it very easily and see thru it to mark bolt holes ETC.
once youve got the model correct you duplicate it in 1/4" steel. another advantage is if your not skilled at welding you can hand the plex-glass model over at your local machine shop and just say "duplicate this in steel please"

http://www.speedtechperformance.com...t_id=385/category_id=145/mode=prod/prd385.htm

No Place To Mount Alternator In Engine Compartment ???

Grumpy I mounted a 871 super charger on my 427 BBC engine in my 1968 Camaro I have a direct drive manual fuel pump for the old style injection that mounts on the front of the timing cover, and an ignition that uses the front damper and a magnetic contact wheel behind the damper, similar too...

garage.grumpysperformance.com

http://www.brphotrods.com/products/68-82 Corvette/index.html

http://billshotrodcompany.com/

http://www.eficonnection.com/eficonnection/58x.aspx

http://www.blackmountainprecision.com/

http://www.superchevy.com/how-to/engine ... rflow.html

viewtopic.php?f=38&t=498

http://www.jagsthatrun.com/Pages/Jaguar_V-8.html

http://www.alangrovecomponents.com/Catalog.htm

http://grannys.tripod.com/generalmotors.html

http://www.trzmotorsports.com/raceparts.html#rear

http://www.mindspring.com/~jayk3/toyota/swaps.htm

BTW heres some sources for parts and info

http://www.billetspecialties.com/assets/pdf/747.pdf

http://www.kwikperf.com/lsx_alt_ps.html

http://www.drivetrain.com/driveline_angle_problem.html

http://jeepinpete.com/engine_trans_adap ... adapt1.htm

http://www.tdperformance.com/TransDapt.html

http://www.brokenkitty.com/xj/xjv8.htm

http://www2.dana.com/expert/wc.dll?DSD~dedsec~2~13~06~

http://www.drivewerks.com/tech/physic_of_racing.htm

http://www.nastyz28.com/chevy-transmission-identification.php

http://www.giloeng.com/

http://www.speedhound.com/lsxswap.html

http://kwikperf.com/

http://www.wilcap.com/

http://www.alangrovecomponents.com/

http://www.novak-adapt.com/

http://www.advanceadapters.com/

http://www.holley.com/2289-1HKR.asp

http://www.cartechbooks.com/vstore/show ... apter=7628

http://www.metalgeek.com/static/cope.pcgi

http://andersonimprovements.com/hobbies/truck/differentialid.html

http://www.maliburacing.com/tech_rearend_swaps.html

http://chucker54.stores.yahoo.net/enginemounts.html

http://www.carnut.com/specs/rear.html

http://www.carnut.com/specs/engdim.html

http://www.oldengine.org/unfaq/leadfoot/trans.htm

http://www.personal.kent.edu/~wbainey/BMW.htm

http://www.alangrovecomponents.com/

http://www.jagsthatrun.com/Pages/Datsun_Z_V-8.html

http://mywebpages.comcast.net/pparaska/drivelinemods.htm#driveshaft_loop

http://www.gmcopo.com/engineswap.htm

http://www.enjenjo.com/9inch.html

http://driveshaftmasters.com/troubleshootingshafts.html

http://www.johnscars.com/zcar/zcar.html

http://www.advanceadapters.com/

http://www.engineswaps.com/

http://www.geocities.com/z28esser/length.html

http://www.thezstore.com/page/TZS/CTGY/PRC01

http://www.badasscars.com/techtips.html

http://700r4.com/faq/faq.shtml