looking for a source for rubber or plastic window gasket material similar too this in cross section thats about 0.7"-1.2" wide that will allow it to be rather easily bent , I don,t need a great deal maybe 10ft or so, any idea where to find similar material.
I'm not even sure where to look, and I,m sure open for lots of suggestions.
Ideally one slot fits about 1/8" window glass and the slot depth perhaps 1/2"-5/8" deep the opposite side maybe a 1/4" thick body panel perhaps 1/2"-5/8" deep
I'm not even sure where to look, and I,m sure open for lots of suggestions.
Ideally one slot fits about 1/8" window glass and the slot depth perhaps 1/2"-5/8" deep the opposite side maybe a 1/4" thick body panel perhaps 1/2"-5/8" deep