My last Dyno
- Thread starter DorianL
- Start date
theres something wrong going on here I don,t understand, horsepower and torque ALWAYS cross at 5252rpm
the formula is
torque x rpm/5252=hp
the formula is
torque x rpm/5252=hp
That's because the HP (left side of the graph) tops out at 650 and the TQ. (Rt. side of the graph) tops out at 850.
Some dyno programs show them like this. I admit it's confusing. Also the tq. is listed in nm and not FT. LB.
If they were the same scale they should be the same at 5252 RPM.
Some dyno programs show them like this. I admit it's confusing. Also the tq. is listed in nm and not FT. LB.
If they were the same scale they should be the same at 5252 RPM.