Oil Pan and Pickup Selection

[Indycars]

Has anyone had experience with Trans Dapt oil pans??? I'm wondering what kind of quality I could expect? The two pan I'm considering are the Trans Dapt 8991 and the Moroso 20200. The Trans Dapt is nearly $50 cheaper. Also along the same lines I'm wondering how well the bolt on pickup from Melling 12559 ($17) would work. It seems it would be prone to breaking at the pickup tube to flange connection. Moroso recommended their pickup 24360 ($45) which is a press fit with bolting support.

http://www.summitracing.com/parts/TRD-8991/


http://www.summitracing.com/parts/MOR-20200/


What do you all think about these pickups???

http://www.champpans.com/index.cfm?even ... ail&id=199

 

[grumpyvette]

I buy lots of oil pans but keep in mind I generally modify them,heres where Ive bought most of my SBC oil pans and had both LOW COST and REASONABLE QUALITY.

http://www.midwestmotorsportsinc.com/in ... parent=277

http://www.midwestmotorsportsinc.com/in ... parent=277

http://www.champpans.com/index.cfm?even ... ail&id=199

http://www.enginelabs.com/engine-tech/holding-oil-choosing-right-high-performance-oil-pan/

don,t forget the windage screen

this type pick-up in a matched pan works really well
viewtopic.php?f=54&t=64&p=1733&hilit=+windage+tray#p1733

http://www.midwestmotorsportsinc.com/in ... t=275&pg=1

read these

viewtopic.php?f=54&t=65

viewtopic.php?f=54&t=1800

viewtopic.php?f=54&t=206

viewtopic.php?f=54&t=1192

viewtopic.php?f=51&t=1718&p=4257&hilit=+rear+seal#p4257

viewtopic.php?f=51&t=1458&p=3265&hilit=shrapnel#p3265

viewtopic.php?f=54&t=2187&p=11571&hilit=windage+tray#p11571

viewtopic.php?f=54&t=64&p=1733&hilit=+windage+tray#p1733