Pulling Pressed In Rocker Studs

[Grumpy]

I've been reading alot on problems with rocker-arm studs moving up (pulling)
On a stock engine and normal use is their any reason to think this could be a problem?
I see some people "pin" the studs others machine in threaded studs thanks[/img]



read through these links it should help

http://garage.grumpysperformance.co...-in-vs-threaded-rocker-studs.2746/#post-43539

http://garage.grumpysperformance.com/index.php?threads/rocker-push-rod-wear-issues.9815/#post-37266

http://garage.grumpysperformance.co...e-springs-and-setting-up-the-valve-train.181/

http://garage.grumpysperformance.co...ve-spring-iinstalled-height.12791/#post-66038

 

[busterrm]

Make sure before you tap the hole, countersink it, A sharp edge and bolt or stud don’t play well together, usually resulting in the cast iron cracking!