obviously you need to have a quality replacement that fits the corvette so ,
buy a decent brand like MOOG TIMKEN, or ACDELCO
not some chinese knock-off crap
http://garage.grumpysperformance.com/index.php?threads/wheel-hub-replaced.14766/
unfurl="true"]https://www.rockauto.com/en/catalog...,brake+&+wheel+hub,wheel+bearing+&+hub,1636[/
unfurl="true"]https://www.rockauto.com/en/catalog...08,brake+&+wheel+hub,wheel+bearing+&+hub,1636
theres a rather well done thread over on a different web site that might prove useful
and you may as well do the u-joints as the parts are all exposed in the hub replacement process.
related info
buy a decent brand like MOOG TIMKEN, or ACDELCO
not some chinese knock-off crap
http://garage.grumpysperformance.com/index.php?threads/wheel-hub-replaced.14766/
unfurl="true"]https://www.rockauto.com/en/catalog...,brake+&+wheel+hub,wheel+bearing+&+hub,1636[/
unfurl="true"]https://www.rockauto.com/en/catalog...08,brake+&+wheel+hub,wheel+bearing+&+hub,1636
1985 CHEVROLET CORVETTE 5.7L 350cid V8 Universal Joint | RockAuto
RockAuto ships auto parts and body parts from over 300 manufacturers to customers' doors worldwide, all at warehouse prices. Easy to use parts catalog.
www.rockauto.com
theres a rather well done thread over on a different web site that might prove useful
C4 - Rear Hub Replacement
I began hearing a clicking sound from the rear of my '95, and thought it might be either a halfshaft ujoint or the hub bearing. The noise occurred on starts, and I could also occasionally hear it if I unloaded the drivetrain at low speed (this is a six speed manual car). The easy way to check...
www.digitalcorvettes.com
and you may as well do the u-joints as the parts are all exposed in the hub replacement process.
related info
c4 vette alignment specs
related linked info, skipping reading through, the links reduces your chances of finding the info, YOU MAY NEED! http://garage.grumpysperformance.com/index.php?threads/upgrading-the-suspension-on-a-c-4.483/ https://tech.corvettecentral.com/2011/07/wheel-alignment-specs/...
garage.grumpysperformance.com
need a 12 -20 ton hydraulic press? OF COURSE YOU DO!
buy the march 2010 issue of CAR CRAFT MAGAZINE,on approximately pg 56 theres a coupon for a 12 ton hydraulic press from HF for $80 that normally sells for $129 on sale and $139 not on sale or damn near any car related magazine,as the 20-25% off coupons come out frequently, Id point out that...
garage.grumpysperformance.com
should you replace all 6 u-joints ?
"grumpys my 1981 vettes rear right outside u-joint just started squeaking I took it apart and its trashed, should I be replacing the others or is this most likely just an isolated parts failure?"...
garage.grumpysperformance.com