reseting a c4 vettes....... change oil light

grumpyvette

Administrator
Staff member
Here's how to reset it: REMEMBER IT VARIES BY YEAR, and THE SHOP MANUAL IS THE PLACE TO LOOK IT UP

1. Turn the key to RUN, but don’t start the engine.

2. Press ENG MET on the Trip Monitor. Then, within five seconds, press it again.

3. Within five seconds, press and hold GAUGES on the Trip’Monitor. The CHANGE OIL light should flash.

4. Hold the GAUGES button until the CHANGE OIL light stops flashing and goes out. This should take about ten seconds.

When the light goes out, the monitor is reset. If the monitor doesn’t reset, turn the ignition off, then try again.



OR
Instructions

1.
Step 1

Here is how to reset that annoying change oil light on a 1990 to 1996 model Corvette.
When you have had an oil change or otherwise here is how to reset the light. When you see this message on the Trip Monitor, turn the ignition switch on but don't start the engine. push the "ENG MET" button on trip monitor one time.
2.
Step 2

Press "ENG MET" button one more time within five seconds. Within five seconds, press and hold the "RANGE" button (1990-1994) or the Guages button on 1995 vettes. You will see the light start to flash.
3.
Step 3

When the light stops flashing the change oil message light has been reset
 
Back
Top