Rodeck Aluminum Nascar Engine Brodix 15 Degree Reading Material Grumpy

B&R Racing

solid fixture here in the forum
I just got the Cylinder Head Studs in for the Dart M2 Raised cam Tunnel block.
Like nothing I have even seen before.
Sorta like SB2 But I think they are different unique.
15 degree Brodix Heads, dont have yet.
Now I need the special Head gaskets to go with, no one is going to have on hand I know of.
Need before I head to the machine shop, need to have the matching headgaskets to torque plate hone the block.
Looked in My Felpro Racing Gasket Catalog paperback dated 2006 year see no listing for.
Think its 2011 when the Nascar Rodick engine was released.
Have any reading material on the Rodick Nascar engine detailed and Brodix 15 degree valve inclination heads Grumpy ?
Everything is 1 off parts.
 
IGyM30x.jpg
Ga28zbl.jpg
 
There must be a special BHJ Torqie plate made for the heads too.
Have to check into tonight.
I bought a Custom BHJ Torque plate for a Pontiac V8 late 2018, costed me $725.00 to have it made up for me.
 
They are the Correct Cylinder Head studs Grumpy.
Jaw dropping price.

GB2200 13.5 Degree Heads.
282 cc intake runners.
Set up for 2.000 inch header primary tubes.
410 Sprint Car 1000+ Hp Cylinder Heads !
 
by the time you buy and machine and install all the parts , like rockers, intake manifold and valve covers,
and anything related and needed accessories, needed too get this running,
and assembled you'll have $12K in it,
before the short block is even touched and thats certain to need special pistons
 
Last edited:
by the time you buy and machine and install all the parts , like rockers, intake manifold and valve covers,
and anything related and needed accessories, needed too get this running,
and assembled you'll have $12K in it,
before the short block is even touched and thats certain to need special pistons
Got them, Ross 2618 Forged pistons.
Full Hard Anodized.
Thermal barrier coated by Ross.
Full Skirt round design.
Top Ring down for power adder.
Modern diametric piston rings.
Pin Buttons.
Middleweight lightweight Tapered pins.

Cant show much. Customers engine.
Going into a Street Racer 1986 Corvette.
 
Have the Brand New Del West Titanium valves.
Nascar Quality.
Intake and exhaust both Ti.​
 
Back
Top