I come to learn about this place from SuperfastMatt on Youtube, see video below. Sounds like
a great place for those of us that don't have a machine shop readily available. Upload a drawing
and see immediately your cost. You can have your part in roughly 5 days.
They can laser cut from several materials including SS, Cork and Carbon Fiber. They have
software you can use if you don't already have your own.
https://sendcutsend.com/
I like this guys videos, his humor is good. He worked for Tesla at one time.
The video starts at 44 seconds, where he talks about SendCutSend.
a great place for those of us that don't have a machine shop readily available. Upload a drawing
and see immediately your cost. You can have your part in roughly 5 days.
They can laser cut from several materials including SS, Cork and Carbon Fiber. They have
software you can use if you don't already have your own.
https://sendcutsend.com/
I like this guys videos, his humor is good. He worked for Tesla at one time.
The video starts at 44 seconds, where he talks about SendCutSend.
Last edited: