SRH ProFiler 13º DYNO results and BUILD list

Chad Speier

Active Member
1007.7 hp at 8600
668 tq at 7100
433 cid
4.220 bore x 3.875 stroke
16.82 compression
Dart Iron Eagle Block
8.999 deck
.440 raised cam
55mm core Comp Cam
.904 BAM LIFTERS
7/16" intake pushrods
1/2" exhaust pushrods
282/297 115 LSA
1.006" / .955" lift
13 deg Profiler Heads by SRH (Chad Speier Racing Heads)
Brett Miller R420.2 manifold
Burr finished by Ron Warrick
2.35 blade CFM carb
2" to 2 1/8" headers - 27" primary length
Merge collectors
3.25" Choke / 4.00" Outlet
Q16 fuel
Star Machine Vacuum Pump
Dailey Engineering external pump with .875 pressure section
Mickey Williams 2 Piece Pan
Driven BR30 OIL
 

Attachments

  • 315110391_565851215347020_1422679527427144545_n.jpg
    315110391_565851215347020_1422679527427144545_n.jpg
    296.5 KB · Views: 4
  • 313885033_671502037757404_2210220779346955221_n.jpg
    313885033_671502037757404_2210220779346955221_n.jpg
    78.3 KB · Views: 3
  • 313427893_565850192013789_5309631480318007197_n.jpg
    313427893_565850192013789_5309631480318007197_n.jpg
    319.4 KB · Views: 4
  • 315590313_565849945347147_8099300147225317789_n.jpg
    315590313_565849945347147_8099300147225317789_n.jpg
    82 KB · Views: 4

Grumpy

The Grumpy Grease Monkey mechanical engineer.
Staff member
thats darn impressive, your well into, a power range, that Id have expected from a well built BBC, with at least 460 cid, not a SBC
 

T-Test

solid fixture here in the forum
Wizard hat is nice.
And the monster motor is going in what? Whatever it is, sit down, buckle up, hang on!
 
Top