SRH ProFiler 13º DYNO results and BUILD list

[Chad Speier]

1007.7 hp at 8600
668 tq at 7100
433 cid
4.220 bore x 3.875 stroke
16.82 compression
Dart Iron Eagle Block
8.999 deck
.440 raised cam
55mm core Comp Cam
.904 BAM LIFTERS
7/16" intake pushrods
1/2" exhaust pushrods
282/297 115 LSA
1.006" / .955" lift
13 deg Profiler Heads by SRH (Chad Speier Racing Heads)
Brett Miller R420.2 manifold
Burr finished by Ron Warrick
2.35 blade CFM carb
2" to 2 1/8" headers - 27" primary length
Merge collectors
3.25" Choke / 4.00" Outlet
Q16 fuel
Star Machine Vacuum Pump
Dailey Engineering external pump with .875 pressure section
Mickey Williams 2 Piece Pan
Driven BR30 OIL

 

[Grumpy]

thats darn impressive, your well into, a power range, that Id have expected from a well built BBC, with at least 460 cid, not a SBC

 

[Indycars]

That's not your typical weekend warrior at 2.33 hp/cu !!! Very nice !

 

[T-Test]

Wizard hat is nice.
And the monster motor is going in what? Whatever it is, sit down, buckle up, hang on!

 

[Chad Speier]

Chris and I have working hard to make a wedge headed SBC make 1000+ on his dyno.

That is a lot of power!