Sway bar link bolt

I replaced my suspension bushings on my 1977 with poly. When I got to the sway bar I noted that the original link bolts were 7 inch and the replacement from energy suspension were 5 1/2 inches. I replaced them with stainless steel bolts I purchased at McMaster Carr. They claim that the bolt has a 70,000 psi tensil strength. Do you think I am ok with them. Thanks for the help, Jack
 
not being able to inspect the installation, or look over the suspension,clearances and geometry, makes that an almost impossible guess, but in most cases the bolts are not under high stress and you should be fine


swaybar3.jpg
 
Back
Top