heres a short list REMEMBER the object or goal in building and maintaining the lubrication system is too maintain a 100% dependable pressurized cooling flow of lubricant to the bearings, rockers,valves etc. obviously use of a high quality synthetic oil that has a higher heat tolerance and that...
garage.grumpysperformance.com
now the short answer is that almost any name brand of automotive 10w30 oil can be used in most modern auto engines,but obviously some are going to be better quality than others,THINNER VISCOSITY'S WILL TEND TO FLOW FASTER , ESPECIALLY AT LOWER TEMPS. ID strongly suggest you read thru the...
garage.grumpysperformance.com
"OK GRUMPYVETTE< I have dumb question? What is a windage tray and whats it for?" windage trays don,t provide a huge boost in horse power, the purpose is mostly in providing much improved oil control, faster oil return and less aeration and increased delivery efficiency, to the oil pump, the...
garage.grumpysperformance.com
theres seems to be a lot of mis-information about , how the oil pump regulates its pressure curve, and the related subject of shimming oil pump springs and how your oil pumps pressure bye-pass circuit works. PRESSURE, that you see displayed on the oil pressure gauge is a measure of the...
garage.grumpysperformance.com
Grumpy, I have already run my engine and used standard oil with Zinc additive. My question is this: I was wondering if it is unwise to change over to synthetic since the break in is already done. I drained the oil after I ran the engine for about an hour, cut the filter apart and it was clean...
garage.grumpysperformance.com
after reading all the posted info , you would more than likely avoid or skip the related links, so I posted them at the beginning so you at least realize, theres much more and useful info available
https://www.cpperformance.com/products/Engine_Parts/valve-spring-oiler.htm btw if you don,t want...
garage.grumpysperformance.com
always read, understand and follow the piston manufacturers guide for piston to bore clearance and how you measure that correctly