Strictly Attitude
solid fixture here in the forum
OK here I am looking at my options for a 91-93 octane pump gas streetable. Looking into as many aspects as possible to make things go smooth and end up with what I want in the end. So from my readings quench is good .038-.046 or .044 or .042 depending on which of Grumpy's posts you read lol. Brian likes .039 zero deck with .039 felpro and Grumpy likes to be at .042-.044 ideal. Now how can plan ahead to reach those numbers and have an optimal compression ratio to run on pump gas?
So I know I have a standard deck block which should be 9.025 deck height and I know I will run a crank with a stroke of 3.75" and a rod that 6.0".
What numbers am I looking for in pistons to let me know how far in the whole they should sit?
I realize that the ability to choose a certain thickness head gasket will help hugely here also?
Any insight is apreciated here.
So I know I have a standard deck block which should be 9.025 deck height and I know I will run a crank with a stroke of 3.75" and a rod that 6.0".
What numbers am I looking for in pistons to let me know how far in the whole they should sit?
I realize that the ability to choose a certain thickness head gasket will help hugely here also?
Any insight is apreciated here.