do you ever spend a few moments reading these YOUTUBE, engine build's and dozens of threads & links and.. think to yourself...
hell I could do that easily, or do you eventually realize that they never mentioned XYZ machine work, or several new parts were required to make that engine assembly work, or that it costs you a couple thousand dollars and a few weeks time in most places to get the work done, or that there is rarely a decent machine shop in your area that can do the required work, or in some cases even understands correctly what your asking for or how its done, nor do they, at your local machine shop ,have the correct machinery or the experienced machinist that can do the work.
and that was damn important info they skipped over or ignored.
yeah the YOUTUBE engine build mentioned you needed chrysler roller lifters to be used on that BBC engine build,
but they failed to mention the cost of correctly machining the block and sleeving the lifter bores, etc.
or they casually mentioned line honing the main caps, and installing splayed main caps,
but never mentioned that if you go to your local machine shop they may not have the tools or experience to do the job correctly.
I also on many occasions think, hey, I could and have done similar builds and in many cases got even better results!
but the truth is that they left out telling you about the hundreds of dollars of precision machine work they did, in the build video, or that they only got the impressive results once they swapped in, some new component parts like, a new set of forged high compression pistons,on new forged stroker clearanced connecting rods and a new forged crank and new aftermarket damper, while they made you think the build was on a OEM short block!
or they just failed to mention they swapped to a 3600 rpm torque converter, because, they were forced too, as the stock transmission and converter stall would never work, with the engine build,
our they made you think they used a stock HEI ignition, ignoring the fact they spent about $1200 on a new ignition system they never mentioned in the video to get the engine to run well?
or DAMN! I should have thought of that mod, as it's obvious now that I have seen how and why it was done!
or maybe, you look and know from past experience that they went down the wrong path or route, used the wrong parts,
because you did something similar and found it caused serious clearance or other issues, or maybe you find yourself ,
looking at the info, and muttering that's total B.S... or thinking "good luck finding a machine shop that will do the work to that precise work, or at the required precision clearance level"
I know I see a lot of builds and see they ignored telling you the reader about a great deal of the required steps, the cost of the parts,
or failing to mention critical and mandatory modifications that are required, or skipping over the typical issues you'll be forced to deal with, like finding headers that fit both your heads (allowing decent access and clearance to the spark plugs and ignition wire access, and clearing your car's frame, suspension, oil pan, starter etc.) many of the builds make it seem like you simply take out the parts and bolt the stuff together and it all fits and functions flawlessly.
they never mentioned that that engine requires custom built headers, or a custom built and modified oil pan,
or they post impressive power numbers you have to assume they pulled out of their A$$ simply because you've built a nearly identical engine and you never saw any similar results.
well I learned to take a great many of those YOUTUBE engine build videos for exactly what they really are... an advertisement meant to mostly get you to,
to buy parts or machinist services for a certain vendo or machine shop, but there is ALWAYS things you can learn, skills you can improve on and tips on how to accomplish some mods that really do have the potential to increase power or durability, or point out that there are certain parts or parts combinations that are well documented to produce both respectable power and decent durability?
the one thing most of the YOUTUBE builds ignore most frequently is the initial cost of the parts , the potential lack of easy availability of those parts, and the rather obvious time and significant added cost of getting the machine work done correctly
your thoughts , LADIES & GENTLEMEN?
hell I could do that easily, or do you eventually realize that they never mentioned XYZ machine work, or several new parts were required to make that engine assembly work, or that it costs you a couple thousand dollars and a few weeks time in most places to get the work done, or that there is rarely a decent machine shop in your area that can do the required work, or in some cases even understands correctly what your asking for or how its done, nor do they, at your local machine shop ,have the correct machinery or the experienced machinist that can do the work.
and that was damn important info they skipped over or ignored.
yeah the YOUTUBE engine build mentioned you needed chrysler roller lifters to be used on that BBC engine build,
but they failed to mention the cost of correctly machining the block and sleeving the lifter bores, etc.
or they casually mentioned line honing the main caps, and installing splayed main caps,
but never mentioned that if you go to your local machine shop they may not have the tools or experience to do the job correctly.
I also on many occasions think, hey, I could and have done similar builds and in many cases got even better results!
but the truth is that they left out telling you about the hundreds of dollars of precision machine work they did, in the build video, or that they only got the impressive results once they swapped in, some new component parts like, a new set of forged high compression pistons,on new forged stroker clearanced connecting rods and a new forged crank and new aftermarket damper, while they made you think the build was on a OEM short block!
or they just failed to mention they swapped to a 3600 rpm torque converter, because, they were forced too, as the stock transmission and converter stall would never work, with the engine build,
our they made you think they used a stock HEI ignition, ignoring the fact they spent about $1200 on a new ignition system they never mentioned in the video to get the engine to run well?or DAMN! I should have thought of that mod, as it's obvious now that I have seen how and why it was done!
or maybe, you look and know from past experience that they went down the wrong path or route, used the wrong parts,
because you did something similar and found it caused serious clearance or other issues, or maybe you find yourself ,
looking at the info, and muttering that's total B.S... or thinking "good luck finding a machine shop that will do the work to that precise work, or at the required precision clearance level"
I know I see a lot of builds and see they ignored telling you the reader about a great deal of the required steps, the cost of the parts,
or failing to mention critical and mandatory modifications that are required, or skipping over the typical issues you'll be forced to deal with, like finding headers that fit both your heads (allowing decent access and clearance to the spark plugs and ignition wire access, and clearing your car's frame, suspension, oil pan, starter etc.) many of the builds make it seem like you simply take out the parts and bolt the stuff together and it all fits and functions flawlessly.
they never mentioned that that engine requires custom built headers, or a custom built and modified oil pan,or they post impressive power numbers you have to assume they pulled out of their A$$ simply because you've built a nearly identical engine and you never saw any similar results.

well I learned to take a great many of those YOUTUBE engine build videos for exactly what they really are... an advertisement meant to mostly get you to,
to buy parts or machinist services for a certain vendo or machine shop, but there is ALWAYS things you can learn, skills you can improve on and tips on how to accomplish some mods that really do have the potential to increase power or durability, or point out that there are certain parts or parts combinations that are well documented to produce both respectable power and decent durability?
the one thing most of the YOUTUBE builds ignore most frequently is the initial cost of the parts , the potential lack of easy availability of those parts, and the rather obvious time and significant added cost of getting the machine work done correctly
Generation Gap: Big-Block Chevy OE And Aftermarket Block Variants

By GREG ACOSTA AUGUST 07, 2018
When it comes to big-block engines, there are quite a few variants across multiple manufacturers. However, when you hear the words “big block” with no other qualifier, there is one engine that comes to mind more than others, and that...
By GREG ACOSTA AUGUST 07, 2018
some basic bbc math, to get you thinking about your potential dream bbc combos.
I recently had a discussion with one of the local guys concerning what heads and rotating assembly he should buy now that he recently purchased a tall deck (10.2") big block chevy block. he has a perfectly good 427 forged crank (3.76" stroke) but hes seriously thinking of buying a (4.25" stroke)...
garage.grumpysperformance.com
your thoughts , LADIES & GENTLEMEN?
Last edited:



