I know I could spend a view days reading, but I am working on a date deadline. I also posted this over on the Corvette Forum.
As the ones of you that subscribe to FIC's emails, they are running a sale right now.
So the ones of you more knowledgeable than I in this area, 26 or 30 lb Bosch III's ?
To recap where I am going:
96 LT1 will have the following (which I have on hand, or will)
LT4 Hot Cam
1.6:1 roller rockers
ported heads and intake
headers
might get turned into a 377 (so low miles, doesn't need a rebore, maybe just a quick hone)
4l60E staying with a 3.07 rear gear ratio for cruising, highway, mountain driving
what will the 26's support, I know the 30's will more than do what I need, the 26's are just a tad less in cost (not significantly less), but they are flow matched
https://fuelinjectorconnection.com/...fic-lt4-custom-flow-matched-fuel-injector-set
or
https://fuelinjectorconnection.com/...ducts/30lb-modified-bosch-3-fuel-injector-set
As the ones of you that subscribe to FIC's emails, they are running a sale right now.
So the ones of you more knowledgeable than I in this area, 26 or 30 lb Bosch III's ?
To recap where I am going:
96 LT1 will have the following (which I have on hand, or will)
LT4 Hot Cam
1.6:1 roller rockers
ported heads and intake
headers
might get turned into a 377 (so low miles, doesn't need a rebore, maybe just a quick hone)
4l60E staying with a 3.07 rear gear ratio for cruising, highway, mountain driving
what will the 26's support, I know the 30's will more than do what I need, the 26's are just a tad less in cost (not significantly less), but they are flow matched
https://fuelinjectorconnection.com/...fic-lt4-custom-flow-matched-fuel-injector-set
or
https://fuelinjectorconnection.com/...ducts/30lb-modified-bosch-3-fuel-injector-set