440 stroker probably in the future

[grumpyvette]

I had a friend stop by, he wanted me to look at his road runner,its got a really nice 440 chrysler in it, seems its running a bit rought and smoking, some blow bye etc. a quick check by pulling each plug wire and use of my IR temp gun quickly found two cylinders were not firing, he to it home and did a compression check, and theres obvious detonation damage, he admits he got cheap and loaded the tank with the cheapest fuel he could find, knew it (PINGED) but never retarded the timing.......yeah I grinned and ask him HOW MUCH DID YOU SAVE ON THAT TANK OF GAS??? well I hope it covers the rings, bearings,gaskets, pistons, reballancing, etc.......
he looked sick, then ask me to find a stroker rotating assembly, saying if hes going thru a rebuild hes going to up the displacement a bit....I told him to wait before ordering parts, and to do the careful inspection on disassembly as the block might be trash!

http://www.carcraft.com/techarticles/cc ... _to_512ci/

http://spideraccessories.stores.yahoo.n ... 07100.html

http://www.moparmusclemagazine.com/tech ... index.html

http://www.moparmusclemagazine.com/tech ... index.html

http://www.moparmusclemagazine.com/tech ... index.html

http://www.moparmusclemagazine.com/tech ... index.html

http://www.440source.com/strokerkitfaq.htm

http://www.rpmmachine.com/440-500-chrys ... oker.shtml

http://www.speedomotive.com/s-14-big-bl ... -hemi.aspx

http://www.moparmusclemagazine.com/tech ... index.html

http://www.campbellenterprises.com/eagl ... 00_440.htm

http://www.moparmusclemagazine.com/tech ... index.html


http://www.moparmusclemagazine.com/tech ... index.html

http://www.moparmusclemagazine.com/tech ... index.html

http://www.moparmusclemagazine.com/tech ... index.html

http://chucker54.stores.yahoo.net/44stki.html

http://chucker54.stores.yahoo.net/bigblstroas.html

http://chucker54.stores.yahoo.net/incyhe.html

http://www.indyheads.com/headporting.html

http://www.indyheads.com/images/p_pge/price15.pdf