Discussion in 'Intake Systems , Fuel Systems and Related' started by Arjen, Jun 11, 2018.
Where can I buy the pipe work and adapters to make fuel pipes ?
Summit Racing online. Jegs Online.
If you have a local speed shop its most convenient to shop buy in person Fuel system related parts hardware needed.
Use these ratings to decide your return line sizing based upon fuel pump output:
Up to 45 GPH = 5/16" or -04 AN
Up to 90 GPH = 3/8" or -06 AN
Up to 250 GPH = 1/2" or -08 AN
Up to 450 GPH = 5/8" or -10 AN
Up to 900 GPH = 3/4"or -12 AN
Use these figures as a fuel line sizing standard: if your feeding a carburetor with the typical 8-10 psi fuel pump feeding to the fuel pressure regulator
* Up to 250 HP = 5/16" or -04 AN
* Up to 500 HP = 3/8" or -06 AN
* Up to 700 HP = 1/2" or -08 AN
* Up to 1000 HP = 5/8" or -10 AN
* Up to 1500 HP = 3/4" or -12 AN
don,t skip READING THROUGH the links,
and sub-links theres a ton of related useful info in those
Separate names with a comma.