building custom headers ,a roll cage? good info

[grumpyvette]

building custom headers suspension,or a roll cage??



heres some tools to help

http://www.porcupinepress.com/_bending/segmentbends.htm

http://www.metalgeek.com/static/cope.pcgi

viewtopic.php?f=40&t=271&p=25953&hilit=roll+cage#p25953

http://www.dragzine.com/tech-stories/ch ... ould-know/

http://www.weldfabulous.com/Welders/c195588/

link that may help

thanks for the software

http://midmoracing.com/bendit.htm

BTW my secuirity software threw a hissy fit when I downloaded that BEND program and required me to run a cleaner program so it probably has tracking software attached

http://www.pirate4x4.com/tech/billavista/Links/

 

[grumpyvette]

you generally need to have a rule book handy and follow the rules if your going to run at a track, most sanctioning bodys require the frame to be tied into the roll cage, not a floor pan

http://www.advanceautoparts.com/english ... 0301rt.asp

http://www.rollcagecomponents.com/

http://www.swracecars.com/store/RollBar ... AR_24.aspx

http://www.metalgeek.com/static/cope.pcgi

http://www.therangerstation.com/tech_li ... llcage.htm

this might help

 

[grumpyvette]

http://www.youtube.com/watch?v=JL9AaYrH ... r_embedded

http://www.youtube.com/watch?v=1nLsrcscoOA

http://www.youtube.com/watch?v=tNYmo2_DI6c

http://www.youtube.com/watch?v=1ZQdCxkeK_4

http://www.youtube.com/watch?v=fpIJ8rN7UFc

http://www.youtube.com/watch?v=_YD4kvEvuTY

http://www.youtube.com/watch?v=j47Sgvj3 ... D88B7CB222

http://www.youtube.com/watch?v=U0fQvU5mros


this video and a few tips might prove useful