you really need to either buy a factory shop manual or down-load the related manuals info
you need a few basic diagnostic tools
like a code scanner, multi meter , vacuum gauge and fuel pressure gauge
https://www.ebay.com/i/172950047831?chn=ps
1) Turn your ignition on. The engine doesn't have to be running, but it's ok if it is...
2) Press reset to clear any warning messages
3) Press and hold the "options" button
4) Press the "fuel" button 4 times while holding the options button down. The car will enter manual diagnostics and start displaying all the codes that are set for every control module in the car.
The diagnostic codes will flash across the screen in the following categories:
PCM - Poweretrain
TCS- Traction control and ABS
RTD- Real Time dampening
BCM- Body Control Module
IPC- Instrument Panel Cluster
Radio- Duh
HVAC- Heating, ventilation and A/C
LDCM- Left Door Control module
RDCM- Right Door control module
SCM- Seat control module
RFA- Remote function actuation
"C" after the code denotes that it is within the current ignition cycle.
"H" means it has occurred in previous ignition cycles, but not the current one.
After the codes have scrolled through you can step through them one at a time using the buttons and clear them with the reset button
If it is the ABS module. it is located in front of the left (drivers side) cylinder head. It is a silver colored metal box (IIRC) about 4x4x4 more or less
http://garage.grumpysperformance.com/index.php?threads/code-scanners-software.3096/page-2#post-85478
http://www.corvetteactioncenter.com...05-corvette-diagnostic-trouble-codes-221.html
2005 - 2009 C6 Corvette diagnostic codes and descriptions
2005 DTC List
2006 DTC List
2007 DTC List
2008 DTC List
2009 DTC List
2005 - 2011 C6 Corvette RPO & Diagnostic Codes
2005 RPO codes
2006 RPO codes
2007 RPO codes
2008 RPO codes
2009 RPO codes
2010 RPO codes
you need a few basic diagnostic tools
like a code scanner, multi meter , vacuum gauge and fuel pressure gauge
https://www.ebay.com/i/172950047831?chn=ps
1) Turn your ignition on. The engine doesn't have to be running, but it's ok if it is...
2) Press reset to clear any warning messages
3) Press and hold the "options" button
4) Press the "fuel" button 4 times while holding the options button down. The car will enter manual diagnostics and start displaying all the codes that are set for every control module in the car.
The diagnostic codes will flash across the screen in the following categories:
PCM - Poweretrain
TCS- Traction control and ABS
RTD- Real Time dampening
BCM- Body Control Module
IPC- Instrument Panel Cluster
Radio- Duh
HVAC- Heating, ventilation and A/C
LDCM- Left Door Control module
RDCM- Right Door control module
SCM- Seat control module
RFA- Remote function actuation
"C" after the code denotes that it is within the current ignition cycle.
"H" means it has occurred in previous ignition cycles, but not the current one.
After the codes have scrolled through you can step through them one at a time using the buttons and clear them with the reset button
If it is the ABS module. it is located in front of the left (drivers side) cylinder head. It is a silver colored metal box (IIRC) about 4x4x4 more or less
http://garage.grumpysperformance.com/index.php?threads/code-scanners-software.3096/page-2#post-85478
http://www.corvetteactioncenter.com...05-corvette-diagnostic-trouble-codes-221.html
2005 - 2009 C6 Corvette diagnostic codes and descriptions
2005 DTC List
2006 DTC List
2007 DTC List
2008 DTC List
2009 DTC List
2005 - 2011 C6 Corvette RPO & Diagnostic Codes
2005 RPO codes
2006 RPO codes
2007 RPO codes
2008 RPO codes
2009 RPO codes
2010 RPO codes
Last edited: