pete84vette
Member
Well I started my 383 today I bought the crankshaft went with a scat forged 3.75 stroke 350 main internal balance for the 6" rods. Now Im trying to decide on the rods. Scat makes both I beam & H beam with 7/16 cap screws but they dont say which gives more cam clearance I want to run a roller cam but I dont know if im gonna need a small base circle cam for a 383 setup. Next after that is the piston Wiseco or KB the wiseco comes with the rings but the keith black is cheaper so I can do the total seal rings. I need the big D Dish piston because I have the corvette aluminum heads 58cc.