these are supposed to be semi easy to install WITH NO REAL EXPERIANCE IN MECHANICS
http://www.carcraft.com/howto/56398/index.html
http://www.gmperformanceparts.com/Engin ... &engCat=sb
http://www.gmperformanceparts.com/_res/ ... Engine.pdf
https://store.gmperformanceparts.com/st ... %20&model=<!--12499120-->
the most comon screw ups are
not reading thru the dirrections before you start several times carefully
not correctly connecting a fuel pump
not verifying fuel pressure
not adding a good electrical ground
not adding oil
verify the O2 sensor is installed in the exhaust pipe bung and connected electrically
not adding a fuel filter and verifying youve got consistant fuel pressure
not filling the coolant, and verifying the pump moves coolant thru the system
not correctly routing the fuel flow direction or connections of both feed
and return lines
(the fuel pressure reg mounts too the discharge side of the fuel rails and return line)
don,t forget to wire the starter and connect the drive train
http://www.carcraft.com/howto/56398/index.html
http://www.gmperformanceparts.com/Engin ... &engCat=sb
http://www.gmperformanceparts.com/_res/ ... Engine.pdf
https://store.gmperformanceparts.com/st ... %20&model=<!--12499120-->
the most comon screw ups are
not reading thru the dirrections before you start several times carefully
not correctly connecting a fuel pump
not verifying fuel pressure
not adding a good electrical ground
not adding oil
verify the O2 sensor is installed in the exhaust pipe bung and connected electrically
not adding a fuel filter and verifying youve got consistant fuel pressure
not filling the coolant, and verifying the pump moves coolant thru the system
not correctly routing the fuel flow direction or connections of both feed
and return lines
(the fuel pressure reg mounts too the discharge side of the fuel rails and return line)
don,t forget to wire the starter and connect the drive train