Grumpy I am at it again I was getting tires on my truck and happened to ask the guy what he did with the old weights and he said he was going to bury them because everybody says that they want them but nobody ever comes to get them so I ended up with at least 500 #s of old wheel weights and so I will be starting to cast bullets. I called a guy I know and asked him if he ever tried bullet casting and he said that he started to collect the stuff to do it but started having health issues so he never started to try it. I'm going tomorrow and buying what he has then looking for the rest of what I'll need. I looked on Amazon for a couple books and there is quite a bit of books out there and I need to read back over your section about casting to study it better because when I read them a couple years ago I really wasn't thinking about casting myself so I need to re read all that info I do remember the wheel weight/tin mix 95% 5% do you know of some of the better books to buy and a list of the obvious and about how you would handle this situation. I wasn't planning to dive in like this from the start but I'm doing it so I may as well get whatever I need and get started