Id like to replace the TIG welder I was forced to sell in my move from FLA to TX. last year,
I want to purchase a AC/DC pulse TIG with a 200-250 AMP rating,
I kept the fluid torch, fluid pump and foot petal , and shield gas gauge set, assembly from the old miller TIG, so I may not need those components
Id really prefer to stay away from Asian /Chinese manufactured TIG WELDERS,
simply because they are manufactured in limited batches and in 3-5 years, schematics, and parts may no longer be available.
so what's your ideas about the best value in a decent TIG welder, priced at under about $2200-or so?
(yeah, cheaper is always better, but you almost always tend to get what you pay for, and get screwed on purchasing low quality parts)
and what are you gentlemen paying for a customer owned and refillable full size shield gas tanks
( for one time purchase/ or much less desirable monthly rental cost)
your thoughts guys!
there is ALWAYS a compromise, made between quality and price
I learned that long ago,
“Quality is like buying oats:
If you want nice, clean, fresh oats, you must pay a fair price.
However,
if you can be satisfied with oats that have already been through the horse ...
that comes a little cheaper.”
there's lots of tools, I just don't know how you can be active in this hobby without owning,
like a place to work with a flat smooth concrete floor and decent lighting, that's shielded from weather,
like at least one engine stand, a decent engine crane, an air compressor, floor jack, jack stands,(or obviously a car lift)
a wide assortment of basic mechanics tools, a decent drill press or ideally a milling machine and lathe,
, and at least a MIG or TIG or oxy-acetylene torch welder, instantly come to mind!
hell yes I miss my old shop/garage,
but I'm as rapidly as I can replacing it ,
and its contents with the best equipment , shelving etc. I can afford too, acquire
I want to purchase a AC/DC pulse TIG with a 200-250 AMP rating,
I kept the fluid torch, fluid pump and foot petal , and shield gas gauge set, assembly from the old miller TIG, so I may not need those components
Id really prefer to stay away from Asian /Chinese manufactured TIG WELDERS,
simply because they are manufactured in limited batches and in 3-5 years, schematics, and parts may no longer be available.
so what's your ideas about the best value in a decent TIG welder, priced at under about $2200-or so?
(yeah, cheaper is always better, but you almost always tend to get what you pay for, and get screwed on purchasing low quality parts)
and what are you gentlemen paying for a customer owned and refillable full size shield gas tanks
( for one time purchase/ or much less desirable monthly rental cost)
your thoughts guys!
there is ALWAYS a compromise, made between quality and price
I learned that long ago,
“Quality is like buying oats:
If you want nice, clean, fresh oats, you must pay a fair price.
However,
if you can be satisfied with oats that have already been through the horse ...
that comes a little cheaper.”
there's lots of tools, I just don't know how you can be active in this hobby without owning,
like a place to work with a flat smooth concrete floor and decent lighting, that's shielded from weather,
like at least one engine stand, a decent engine crane, an air compressor, floor jack, jack stands,(or obviously a car lift)
a wide assortment of basic mechanics tools, a decent drill press or ideally a milling machine and lathe,
, and at least a MIG or TIG or oxy-acetylene torch welder, instantly come to mind!
hell yes I miss my old shop/garage,
but I'm as rapidly as I can replacing it ,
and its contents with the best equipment , shelving etc. I can afford too, acquire
some sources for garage plans, + some build info experiances
if your planing to build a shop/garage, its going too be a huge advantage to your planed project, check with building and zoning as too what size and type of structure will be allowed and what are the required steps before a proposed shop/garage can be built. in many areas this will require a...
garage.grumpysperformance.com
what hand tools to buy
If your starting out thinking you want to be a professional mechanic, you really need to get some schooling and certifications before anything else or your very unlikely to get hired,tool will be important but get the schooling, degrees first, if your just doing it as a hobby,thats a different...
garage.grumpysperformance.com
sources for auto tools
sources for tools http://www.skhandtool.com/media/907273/ ... atalog.pdf (one of the few still all American made) CHECK OUT THE LINKS THESE RARER SOME tools can be damn hard to find http://www.ggtechnics.com.au/products/...
garage.grumpysperformance.com
tool boxes and chests
A,http://www.homedepot.com/p/Husky-52-in-18-Drawer-Tool-Chest-and-Rolling-Tool-Cabinet-Set-Black-HTC5206-HMT5212/205431577 the more Of my friends that take advantage of this HUSKY/HOME DEPOT tool chest, the more I think I need to follow suite and buy one also, I look these over and constantly...
garage.grumpysperformance.com
Precision measuring tools
I’m looking for the best quality precision tools on a limited budget (i.e. I don't want to pay $300 for one mic). I plan on building the occasional small- & big-block Chevy (more than one, less than 1000). Names that come up on the limited results I’ve found on the web include Starrett...
garage.grumpysperformance.com
slowly getting back into the engine/car hobby, ordered 14 heavy duty shelves
https://www.northerntool.com/shop/tools/product_200700934_200700934?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Storage%20%2B%20Organizers%20%3E%20Wire%20Shelving%20%3E%20Wire%20Shelving%20Units&utm_campaign=Ironton&utm_content=62497&gclid=EAIaIQobChMIl4vpkZHK-wIVBBXUAR17NACZEAQYASABEgLfnP...
garage.grumpysperformance.com
Last edited: