installing cam bearings

[grnssei95]

Hi all,

I am new to this site. Can anyone give me any insite to installing cam bearings in a 350 sbc block.



Thank you

PeeWee

 

[grumpyvette]

MOST OF THE INFO YOU NEED IS LOCATED HERE, in THIS LINK

viewtopic.php?f=51&t=1479

the bearings should be numbered,as they come in a set, they are slightly different external sizes in some locations and are not totally interchangeable and the oil holes install at 12 oclock-3 o-clock with the block in the normal position and looking from the front, to match the oil passage locations

read thru the link, posted above ,and all its sub links carefully, the thread link posted below might help also
YOU'LL MISS A GREAT DEAL OF INFO,
IF YOU SKIP READING LINKS AND SUB_LINKS ,SCATTERED THROUGH MOST THREADS

these links may be useful
http://garage.grumpysperformance.com/index.php?threads/adjusting-valves.196/

http://garage.grumpysperformance.co...cally-tracking-down-a-valve-train-noise.6237/

http://garage.grumpysperformance.com/index.php?threads/metal-in-oil.10875/#post-47688

http://garage.grumpysperformance.com/index.php?threads/cam-wear-articles-you-need-to-read.282/

http://garage.grumpysperformance.co...k-after-a-cam-lobe-rod-or-bearings-fail.2919/


viewtopic.php?f=51&t=125