I try to look over a few of theres random videos ,
related to modifying, porting and ccing cylinder heads ,
for useful info that they may provide.
(your never too old to learn)
yeah the guy doing the videos sure does not come off looking anything close to skilled, knowledgeable, or professional, in my opinion.
but watch the video and keep an open mind,
because there is some valuable info presented even if the guy making the video,
is not someone I think presents the info well.
personally,
I cringe watching him when he picks up that die grinder and high speed burr.
https://www.billmitchellproducts.com/world-cast-iron-26degree-269cc/
related to modifying, porting and ccing cylinder heads ,
for useful info that they may provide.
(your never too old to learn)
yeah the guy doing the videos sure does not come off looking anything close to skilled, knowledgeable, or professional, in my opinion.
but watch the video and keep an open mind,
because there is some valuable info presented even if the guy making the video,
is not someone I think presents the info well.
personally,
I cringe watching him when he picks up that die grinder and high speed burr.
https://www.billmitchellproducts.com/world-cast-iron-26degree-269cc/
Last edited: