Chad Speier
Active Member
So I wanted to build a guy that had my touches on it to be passed down. I started with a Springfield Mil-Spec and only used the body. I had a custom slide made with my logo on it. Everything is from Ed Brown. I goofed and plan to fix it, but I purchased the SA jig for the hand safety. It's not close as you can see. I will weld it up and fix it later. The frame was taken down to bare polished metal and I blued it. I did all the tricks to it. Trigger, ported the magwell, etc. It has a 3.4lb pull. Then I added my touch with the burr front and rear. I had a pair of custom Altamont grips made. It was a lot of work!
Attachments
-
269755627_5387705997912678_7651082361308948584_n.jpg87.9 KB · Views: 4
-
268325628_10224265698581754_5307465165592527843_n.jpg123.4 KB · Views: 4
-
269678010_10224265699541778_2725670544463612484_n.jpg104 KB · Views: 4
-
269724212_10224265699021765_2007572767481578675_n.jpg84.6 KB · Views: 4
-
269772545_10224265699901787_3892006749804515958_n.jpg62.9 KB · Views: 4
-
269303204_10224259031335077_3173939076407143835_n.jpg169 KB · Views: 4
-
269592133_10224249253890647_3602218620340529799_n.jpg120 KB · Views: 4
-
269673364_10224252952903120_4027579062706739975_n.jpg142.8 KB · Views: 4
-
269697278_10224264108542004_5022256498142313604_n.jpg280.4 KB · Views: 4
-
271300187_10224337044005345_5188845344359567860_n.jpg136.3 KB · Views: 4
Last edited: