guysmontess
Well-Known Member
Heres a link to the kit I bought from Mark at SC&C;
http://scandc.com/new/node/47
I got started on the install,got the drivers side almost all done,and the passenger side is loosened and ready to take apart.We didnt have the proper spring compressor,so I had a heck of a time getting the spring back in place.I'm not sure what was used for springs,but they sure are stiff.But now I know where i should be able to borrow a proper spring compressor,so hopefully the other side is easier.I had to loosen off the header and exhaust pipe,the rear lower control arm bolt wouldnt come out because it was up against one header tube.Heres a few pictures;
I also put new Del-A-Lum bushings from Global West in the lower control arms;
I took the upper arms apart and brushed some anti-seize on the threaded parts to help prevent them from seizing up;
Guy
http://scandc.com/new/node/47
I got started on the install,got the drivers side almost all done,and the passenger side is loosened and ready to take apart.We didnt have the proper spring compressor,so I had a heck of a time getting the spring back in place.I'm not sure what was used for springs,but they sure are stiff.But now I know where i should be able to borrow a proper spring compressor,so hopefully the other side is easier.I had to loosen off the header and exhaust pipe,the rear lower control arm bolt wouldnt come out because it was up against one header tube.Heres a few pictures;
I also put new Del-A-Lum bushings from Global West in the lower control arms;
I took the upper arms apart and brushed some anti-seize on the threaded parts to help prevent them from seizing up;
Guy