Oil Pressure Drops At 15psi On Fresh 327

Just to give a final update and say thanks again. We re-lubed the rotating assembly, installed a new rear main, checked torques, valve lash...even managed to remember the front plugs, and to drill one out. The motor made 25psi with the drill at slow speed and 48-58psi on run up to temp, settled at 20psi at idle and 190F op temp.
 
Great! glad to hear we could help and things improved,
and of course, in the process you gained knowledge and skills
 
Last edited:
You must log in or register to reply here.
Back
Top