paint the cast surfaces
Ive used it and seen several other people use it , it works fine.
glyptal is used to seal in, micro surfaces and prevent fine metallic dust,
that might be present ,
even after a blocks been cleaned,
from getting into the oil flow circulating back to the oil pump,
if the blocks clean, grease free and dry when its applied ,
and if its left to dry over night it will not come off.
I've used it and seen several other people use it , it works fine
I,ve used it and seen several other people use it , it works fine
https://www.ryderfleetproducts.com/...MI_NPtzoHs1AIVWrjACh2A6wFBEAQYASABEgK02fD_BwE
http://knowhow.napaonline.com/how-to-paint-an-engine/
viewtopic.php?f=51&t=125
viewtopic.php?f=51&t=1479
viewtopic.php?f=51&t=2919
viewtopic.php?f=51&t=976
viewtopic.php?f=51&t=1458
Ive used it and seen several other people use it , it works fine.
glyptal is used to seal in, micro surfaces and prevent fine metallic dust,
that might be present ,
even after a blocks been cleaned,
from getting into the oil flow circulating back to the oil pump,
if the blocks clean, grease free and dry when its applied ,
and if its left to dry over night it will not come off.
I've used it and seen several other people use it , it works fine
I,ve used it and seen several other people use it , it works fine
https://www.ryderfleetproducts.com/...MI_NPtzoHs1AIVWrjACh2A6wFBEAQYASABEgK02fD_BwE
http://knowhow.napaonline.com/how-to-paint-an-engine/
viewtopic.php?f=51&t=125
viewtopic.php?f=51&t=1479
viewtopic.php?f=51&t=2919
viewtopic.php?f=51&t=976
viewtopic.php?f=51&t=1458
Last edited by a moderator: