ways to turn over the engine WITHOUT the starter, and if you get the correct tool it hold the degree wheel properly also
http://www.summitracing.com/search/?key ... cket&dds=1
http://www.summitracing.com/parts/PRO-67492/
http://www.summitracing.com/parts/PRO-67491/
theres large bolts for your ballancer
theres crank sockets
Crankshaft Socket Tool For turning AND MOUNTING Degree Wheels
CRANK NUTS
crank rotators
BTW I assume you gentlemen do know theres
even a correct and very inexpensive tool for spinning it from the flex-plate or flywheel,
once the cylinder heads are installed,
so your not stressing the damper retention bolt spinning the engine over manually,
https://www.summitracing.com/parts/wmr-w80510/overview/
https://www.summitracing.com/parts/sum-900178/overview/
http://www.jegs.com/i/JEGS/555/80743/10002/-1
viewtopic.php?f=50&t=611&p=812&hilit=+balancer+timing#p812
http://www.summitracing.com/search/?key ... cket&dds=1
http://www.summitracing.com/parts/PRO-67492/
http://www.summitracing.com/parts/PRO-67491/
theres large bolts for your ballancer
theres crank sockets
Crankshaft Socket Tool For turning AND MOUNTING Degree Wheels
CRANK NUTS
crank rotators
BTW I assume you gentlemen do know theres
even a correct and very inexpensive tool for spinning it from the flex-plate or flywheel,
once the cylinder heads are installed,
so your not stressing the damper retention bolt spinning the engine over manually,
https://www.summitracing.com/parts/wmr-w80510/overview/
https://www.summitracing.com/parts/sum-900178/overview/
http://www.jegs.com/i/JEGS/555/80743/10002/-1
viewtopic.php?f=50&t=611&p=812&hilit=+balancer+timing#p812
Last edited by a moderator: