what brass tumbler/polisher do you use
Ive been seriously thinking of upgrading to this Dillon brass polisher
https://www.dillonprecision.com/case-preparation-equipment_8_8.html
Ive been using a couple LYMAN vibrator/polishers that hold a bit over 1 gallon each,
and while the results are good, they are just not up to handling the volume of rifle cases Id like to process,
and they take about 3-3.5 hours to get the brass pristine even with new medium and polishing cleaner added
any thoughts here? any other options, in a high volume brass vibrator/polisher (and yeah I have 220 volt but prefer 110 volt)
Ive tried a bunch of different mediums and polishing compound mixes they all work
but Id like to dump maybe 2 gallons of medium and cases into the polisher at a time and ideally
(yeah probably dreaming) get good results in as bit under 2.5 hours a batch on 223, 10mm, 44 mag,or 308 cases
Ive been seriously thinking of upgrading to this Dillon brass polisher
https://www.dillonprecision.com/case-preparation-equipment_8_8.html
CV2001 | Vibratory Case Cleaner
Dillon's CV2001 Vibratory Case Cleaner is the big brother to the CV750. The largest case cleaner in the industry, it features a 12-1/2 quart bowl capacity allowing you to polish up to 1,300 .38/.357 or 550 .30-06 cases per hour. Not only is our capacity greater, but our motor is larger...
www.dillonprecision.com
and while the results are good, they are just not up to handling the volume of rifle cases Id like to process,
and they take about 3-3.5 hours to get the brass pristine even with new medium and polishing cleaner added
any thoughts here? any other options, in a high volume brass vibrator/polisher (and yeah I have 220 volt but prefer 110 volt)
Ive tried a bunch of different mediums and polishing compound mixes they all work
but Id like to dump maybe 2 gallons of medium and cases into the polisher at a time and ideally
(yeah probably dreaming) get good results in as bit under 2.5 hours a batch on 223, 10mm, 44 mag,or 308 cases
Last edited: