2Loose
reliable source of info
As I am still working full time and have six car projects going on at once, I tend to get too spread out, but I put this Buick 455 motor together for my '70 GS pro streeter not too long ago. Didn't take enough pix, but here's a few, and I'll find the specs and post them too, don't have them right at hand. Here's a layout of the ported heads and Kenne Bell rocker assembly before it went together:
I tapped into an oil passage at the rear of the block and will run either a separate oil line from the oil pump, or put an oil accumulator tapped in there to boost the pressure when making a pass at the strip:
The motor is not back in the car yet, I need to finish up the back half, front syspension, fuel system; then after the motor is in finish up the electrical.
I have two daily drivers that keep needing little problems resolved that I never figured I would have to put time in on. Guess those "finished" projects are never really finished!!! :roll:
Some pix of the car are HERE.
Aloha,
Willy