I caught a mention of this site while on thirdgen.org. I have an '82 Z-28 with crossfire injection. Drivetrain mods so far include:
upgrade from 305 to 350
Edelbrock Performer heads
COMP 252H cam (way too small, but installed for stock ECM)
full roller rockers
Hooker headers, full 3-inch exhaust, w/ hi-flo aftermarket cat
Renegade crossfire intake
2.0 inch bored throttle bodies
adjustable fuel pressure mod, currently at 18 psi
stock distributor with MSD 6 and externally mounted MSD coil
Dynamic EFI EBL engine computer
TCI Streetfighter TH-350
stock 10-bolt with posi and 3.73s (yes, it sucks driving on the highway)
Upcoming mods include cam swap and rear gear swap to 3.27s. Thoughts on cam would be very helpful.
upgrade from 305 to 350
Edelbrock Performer heads
COMP 252H cam (way too small, but installed for stock ECM)
full roller rockers
Hooker headers, full 3-inch exhaust, w/ hi-flo aftermarket cat
Renegade crossfire intake
2.0 inch bored throttle bodies
adjustable fuel pressure mod, currently at 18 psi
stock distributor with MSD 6 and externally mounted MSD coil
Dynamic EFI EBL engine computer
TCI Streetfighter TH-350
stock 10-bolt with posi and 3.73s (yes, it sucks driving on the highway)
Upcoming mods include cam swap and rear gear swap to 3.27s. Thoughts on cam would be very helpful.