stepside
Well-Known Member
hi
I drove 100 miles to the test and tune days
the track was slippery so I had to leave second gear
best time was 1.8 60ft 11.6 121mph
http://vid1106.photobucket.com/albu...10206048507708237_203054759_n_zps5diuzilm.mp4
so gearheads are there any tricks that I get this car to tens
my combo
all steel 69 cutlass
509 bbc
th400 4000stall
3,4:1 gears
engine specks
509 cid afr 305 heads dart tunnelram ms efi crane hyd roller 244/248 107 lsa
the car did not pull past 5600 so i shimmed valve springs 170 lbs to 200lbs and now it pulls to 7500 easy if i lost traction
I drove 100 miles to the test and tune days
the track was slippery so I had to leave second gear
best time was 1.8 60ft 11.6 121mph
http://vid1106.photobucket.com/albu...10206048507708237_203054759_n_zps5diuzilm.mp4
so gearheads are there any tricks that I get this car to tens
my combo
all steel 69 cutlass
509 bbc
th400 4000stall
3,4:1 gears
engine specks
509 cid afr 305 heads dart tunnelram ms efi crane hyd roller 244/248 107 lsa
the car did not pull past 5600 so i shimmed valve springs 170 lbs to 200lbs and now it pulls to 7500 easy if i lost traction